The Nissan Path

The shrouds were a tad too big so I had to get creative and Dremel them to size.

I added 100mm and 80mm Halo RGB lights.

Looks great!
I also just put in a DTmoto headlight but I left halogens in it (albeit the phillips Xtermevisions)

Would like more light and currently looking at some of the LEDS bulbs other have posted here.
That thread is here:
topic21201.html

Those look really great!
How is the angle of visibility? With halogen/LEDs, the light beam seems to be only about 30'deg each lamp or something (ie. very narrow).

The website says the customer should ceramic-coat the lenses to prevent damage. Did you end up doing that? I wonder if just a lens film would do the trick, so that you don't have to re-apply the ceramic coating every so often.

donaldpath wrote: ↑

Thu Apr 14, 2022 6:44 pm

How is the angle of visibility? With halogen/LEDs, the light beam seems to be only about 30'deg each lamp or something (ie. very narrow).

That's a very typical beam pattern for projector headlights. They all use a horizontal "mask" inside the lamp and reflectors that are biased horizontally so that very little light reaches the top or bottom of the focuser lens. This gives a narrow pattern vertically but wide and bright horizontally. They generally light up a wider swath of road than a reflector, but it's also way more important to have them aimed correctly vertically than with reflector lamps. High aim will get you flashed by vehicles a mile away but make the road in front of you disappear.