Page 1 of 1

Custom Projector Headlights

Posted: Tue Feb 22, 2022 12:54 pm
by Code Pathfinder
I have a lot of catching up to do for the group but I would like to start with the custom headlights that I installed.

The headlights are from DT moto on eBay and the Led projector kit is from HIDProjectors.com (Thank you Tom for this kit!)

Here are some photos of them.

Image

Image

Image

Image


I ended up using the monster shroud kit that Tom sells on his website. The shrouds were a tad too big so I had to get creative and Dremel them to size.

I added 100mm and 80mm Halo RGB lights. Tom can put together a DIY kit for you if you are interested in doing this yourself.

It's not a hard job but I do recommend watching some retrofit tutorials on Youtube so you know what might be in store for when you do yours.

Re: Custom Projector Headlights

Posted: Tue Feb 22, 2022 4:30 pm
by palmerwmd
Looks great!
I also just put in a DTmoto headlight but I left halogens in it (albeit the phillips Xtermevisions)

Would like more light and currently looking at some of the LEDS bulbs other have posted here.
That thread is here:
topic21201.html

Re: Custom Projector Headlights

Posted: Thu Apr 14, 2022 6:44 pm
by donaldpath
Those look really great!
How is the angle of visibility? With halogen/LEDs, the light beam seems to be only about 30'deg each lamp or something (ie. very narrow).

The website says the customer should ceramic-coat the lenses to prevent damage. Did you end up doing that? I wonder if just a lens film would do the trick, so that you don't have to re-apply the ceramic coating every so often.

Re: Custom Projector Headlights

Posted: Thu Apr 14, 2022 7:01 pm
by VStar650CL
donaldpath wrote:
Thu Apr 14, 2022 6:44 pm
How is the angle of visibility? With halogen/LEDs, the light beam seems to be only about 30'deg each lamp or something (ie. very narrow).
That's a very typical beam pattern for projector headlights. They all use a horizontal "mask" inside the lamp and reflectors that are biased horizontally so that very little light reaches the top or bottom of the focuser lens. This gives a narrow pattern vertically but wide and bright horizontally. They generally light up a wider swath of road than a reflector, but it's also way more important to have them aimed correctly vertically than with reflector lamps. High aim will get you flashed by vehicles a mile away but make the road in front of you disappear.