Page 1 of 1

Replacing head light and headlight cover?

Posted: Wed Jul 25, 2012 12:53 pm
by Mr2005
I have 2007 pathfinder.
The clear plastic cover of the headlight is getting murky. I want to put a new one in along with brighter headlights.


Is this a job I can do myself?
Any guess on what that housing costs?
What lights would you recommend for a brighter light? Online sights that sell both?

Much thanks For any help!

Posted: Wed Jul 25, 2012 3:25 pm
by slavabon
Just polish it. Plenty of polish kit available in auto stores. Look up the process on youtube and do the same thing. Replacing the lights will cost hundreds, whilst polishing can be done for under $20 and a little time.

Posted: Thu Jul 26, 2012 8:14 am
by NVSteve
Depends on how much you want to spend. I bought new headlight assemblies (projectors) altogether & threw in HID for the low beams. Whole thing was ~$350.

Just to give you an idea: http://www.carid.com/2007-nissan-pathfinder-headlights/

I've gone the polishing route before, sometimes with success, sometimes not. New OEM housings are pretty damned expensive, so it is certainly worth a try with polishing.

Posted: Tue Aug 07, 2012 1:05 am
by Mr2005
Thansks, is replacing the lights something anyone can do?

Posted: Tue Aug 07, 2012 9:18 am
by NVSteve
Mr2005 wrote:Thansks, is replacing the lights something anyone can do?
It's actually pretty easy. Takes a bit of time because you need some room & need to remove the front wheels. Other than that, just a bunch of screws and bolts that need to be removed.

Posted: Tue Aug 07, 2012 7:35 pm
by smj999smj
I use a 3M headlight lens restoration kit. You can pick them up at most auto parts stores for $13-16. One kit will handle two headlamps. You'll need an electric drill and it's best to use some masking tape and newspaper (or similar) to prevent splatter onto the rest of your vehicle. If you follow the directions and take your time, they will look like brand new when you're finished! Takes about an hour to an hour and a half to restore both lamps, depending on how made they are.