Page 1 of 1

What the . . . ??

Posted: Sun Jul 08, 2007 2:44 pm
by SilverGhost
Anybody else seen this chalky look developing on the plastic vent cover at the base of the windshield? Yeah, I know, a little tire gel will camoflage it . . . but only temporarily. Notice that the panel at the very end (same material) looks good.

Image

Posted: Mon Jul 09, 2007 6:53 am
by phantom2
Same thing on mine.Someone in another forum told me about "Stoner Trim and Shine" and it works great.It lasts 2-3 weeks depending on rainfall.Their "Invisible Glass" cleaner is the best glass cleaner I have ever used.I know the Walmart here carries both products.Here's a link for you.http://www.hwaccessories.com/Stoner%20T ... 20Page.htm

Posted: Mon Jul 09, 2007 2:20 pm
by SilverGhost
phantom2 - Thanks for the link. For now I think I'll try some of my Black Magic Tire Wet Gel. I've used the same 16oz bottle for years - a little goes a long way! I like it because it will last through several rains (at least on the tires).

Posted: Tue Jul 10, 2007 1:06 pm
by LittleStevie
On a related note, what's best for removing white wax/polish stains from plastic? I have not found anything to remove the carryover from my mud/rain flaps and my roof rack and it drives me crazy. Armor All and similar products just seem to mask it for a couple of days.

Posted: Tue Jul 10, 2007 2:46 pm
by SilverGhost
Stevie - I'm certain I've seen products that are formulated to remove that wax residue. I've never needed them, so haven't actually tried any of them. Cozy up to a reputable detailer or independent body shop manager. I'll bet they could recommend a fix.

I'll dig around a bit and see what I can find.

Posted: Tue Jul 10, 2007 3:02 pm
by SilverGhost
Stevie - This should get you started.

http://www.meguiars.com/faq/index.cfm?f ... on=_23#_23

http://www.griotsgarage.com/search.jsp? ... search.y=0

I also saw several recommendations for rubbing the area with a cotton towel (or soft toothbrush) sprayed with WD-40.

Post back when you find something that works for you.

Posted: Tue Jul 10, 2007 3:38 pm
by LittleStevie
SilverGhost wrote:Stevie - This should get you started.

http://www.meguiars.com/faq/index.cfm?f ... on=_23#_23

http://www.griotsgarage.com/search.jsp? ... search.y=0

I also saw several recommendations for rubbing the area with a cotton towel (or soft toothbrush) sprayed with WD-40.

Post back when you find something that works for you.

Awesome, thanks for the links...I'll probably look for the Meguiars, if I don't get gutsy with the WD-40 first. It's always tough keeping the wax off the plastic and the cleaners/conditioners off the paint, no matter how hard you try...WD-40 and my nice blue paint probably do not mix well! I'll let you know what works.

Get a thin liquid wax(I use TheWaxShop) and coat it

Posted: Tue Jul 10, 2007 6:15 pm
by hpc3
about every 3mos. I use it on the rubber door surrounds as well. Dries hazy clear and polishes to a glossy-black finish on plastics/rubber. Use a lint free towel for wiping/polishing. Very important to use a thin liquid formulation, sparingly for best results.

I use a little WD40 under the hood and in other places that don't typically get wet. Wipe off excess.

WD40 did it

Posted: Mon Jul 16, 2007 7:24 am
by LittleStevie
Couldn't find the Meguiars at the local auto parts store, so figured I'd give the WD40 a try, and it worked pretty well. I'd say it removed about 90% of the residue, after a few repeat cleanings. Took care of my mud flaps and roof rack.

Thanks for the tips! Nice to find something that works that's already in the garage.