The Nissan Path

Posted: **Wed Apr 09, 2014 8:17 pm**

so I'm running 285/75/16 with 2" suspension lift.

I want to get steel wheels and was wondering what backspacing could I go with so that I dont have to cut the body work. I dont care about trimming or heating the inner fender plastic but i dont want to cut any metal.

I dont know very much about backspacing or offset or whatnot.

this is what I have in mind
http://www.uswheel.com/collections/stea ... hgnmtlstar

Posted: **Thu Apr 10, 2014 8:17 am**

Anything in the negatives and you’ll need to trim, I would shoot for +20 to be safe. Factory is +30, at least it is for the LE 18”.

http://www.tire-size-calculator.info/

http://www.rimsntires.com/specspro.jsp? ... H2%20wheel

Posted: **Tue Jan 20, 2015 6:49 pm**

I have black Pro Comp wheels. 16x8 -12mm no rubbing. no trimming. They stick out about an inch estimate. Part number 7089-6868. There is picture of it on this site under PRO COMP WHEELS

Posted: **Thu Jan 22, 2015 11:25 am**

What size tire, that's the kicker.

The Nissan Path

Backspacing question

Backspacing question