Needing stock Alloy's info to get Steel's offset right.
Posted: Mon Nov 07, 2011 7:12 pm
Ok, so I can have a responcible set of tyres and rims and then a weekend offroad set, I need to find a durable and or cheap (relative) set. 
We get the 6x114.3 stud pattern (or 4.5" imperial). That's fine, it's the same as the Navara and a few others around now, but the offset is different. My issue is the offset!
Mine's the style below. 17" rim with the larger 320mm (12.6") brake rotors from factory. So 16" rims are really not an option.
What offset do you guys get in the states in a 17" rim?
I have a contact I could get a stock set imported over, or will need to get a steel set sent over.
Rather not go larger than 17" as offroad tyre options are limited and not cheap!
We get the 6x114.3 stud pattern (or 4.5" imperial). That's fine, it's the same as the Navara and a few others around now, but the offset is different. My issue is the offset!
Mine's the style below. 17" rim with the larger 320mm (12.6") brake rotors from factory. So 16" rims are really not an option.
What offset do you guys get in the states in a 17" rim?
I have a contact I could get a stock set imported over, or will need to get a steel set sent over.
Rather not go larger than 17" as offroad tyre options are limited and not cheap!
