The Nissan Path

I'm looking for some help here cause backspacing and offset dont make to much sense to me. Im looking to do the 4x4parts.com delux lift with the bilsteins. but i want to then put 285/75r16 mud terrain km2s on the pathy. but i wanted to get different wheels. im looking at getting Summit Racing® Series 375 Black Ultimate Eight Wheels. will the offset of these help with an rubbing on the inside of the wheel well when turning. sorry if this is a repeate topic.

the specs are 16x8
Backspacing (in):4.930 in.

Offset:+12.00mm

Those should be fine with a 2" lift and will probably remedy the inner rubbing issue, but wont go so far as yo rub on the front fender when turning.

I'm assuming you do not have a V8. Reason being is because I'm not sure the 16's would fit the brake caliper, and with a lower BS than OEM, you might risk the chance of crashing the caliper into the wheel, even if the wheel diameter clears.