Fuse Block for multiple 12V accessories
Posted: Sun Dec 29, 2013 11:38 pm
Hey guys, I thought id share something on the forums...
So i have a few accessories that I tied into the cars battery:
2 rigid dually's
2 10" rigid light bars
1 20" rigid light bar
1 pair morimoto HID fog lights
I thought it was very ugly, amateur and inconvenient to have all these wires going into one battery positive terminal, so I searched around and found this
http://www.bluesea.com/products/5025/ST ... _and_Cover
It is for boats... which is fine with me since its supposed to get wet and salty, I put it on the passenger side on top of a fuse box with zip ties. Is very light, one cable goes to the battery terminal, and one grounds out also each accessory terminal has a fuse. You will want to have a switch for each individual accessory since they will not turn off with the vehicle.
Works very very well, has not failed on me yet and have had it for a few months now.
I'll snap a pic some day,
till then, I hope this helps someone!
-Hydroponix
So i have a few accessories that I tied into the cars battery:
2 rigid dually's
2 10" rigid light bars
1 20" rigid light bar
1 pair morimoto HID fog lights
I thought it was very ugly, amateur and inconvenient to have all these wires going into one battery positive terminal, so I searched around and found this
http://www.bluesea.com/products/5025/ST ... _and_Cover
It is for boats... which is fine with me since its supposed to get wet and salty, I put it on the passenger side on top of a fuse box with zip ties. Is very light, one cable goes to the battery terminal, and one grounds out also each accessory terminal has a fuse. You will want to have a switch for each individual accessory since they will not turn off with the vehicle.
Works very very well, has not failed on me yet and have had it for a few months now.
I'll snap a pic some day,
till then, I hope this helps someone!
-Hydroponix