Scanners Used With Pathfinder? xtool anyscan A30
Posted: Fri Oct 14, 2022 2:57 pm
Hi All,
Does anyone have any experience with the xtool anyscan A30 wireless scan tool. I have a generic OBD II scanner and a Bluedriver that both basically do the same thing. They read trouble codes and thats about it. I should double check my generic one to see if it reads live data but the bluedriver sure doesn't (feel like i was ripped off on the bluedriver but for it working on the ABS and airbag system).
http://www.xtooltech.com/EN/ProductsView/IVCI2.html
I would like to be able to read my air fuel mixture, missfire counts, lean or rich, etc. and such but i can't get squat from the scanners i have. It would also be nice to be able to trigger relearn procedures (SAS etc.) and be about to adjust the idle (truck shakes a little when idling very low like 600-650).
Does anyone have any experience with the xtool anyscan A30 wireless scan tool. I have a generic OBD II scanner and a Bluedriver that both basically do the same thing. They read trouble codes and thats about it. I should double check my generic one to see if it reads live data but the bluedriver sure doesn't (feel like i was ripped off on the bluedriver but for it working on the ABS and airbag system).
http://www.xtooltech.com/EN/ProductsView/IVCI2.html
I would like to be able to read my air fuel mixture, missfire counts, lean or rich, etc. and such but i can't get squat from the scanners i have. It would also be nice to be able to trigger relearn procedures (SAS etc.) and be about to adjust the idle (truck shakes a little when idling very low like 600-650).