Page 1 of 1
96 Pathfinder into a Truck
Posted: Wed Oct 05, 2016 11:19 am
by Stonewolf
Was wondering is it posable to use the Nissan Pathfinder Frame and Put a Truck body on it
Posted: Thu Oct 06, 2016 3:31 am
by Homer J
Since you're posting this in the R50 sub, I have to assume that is what you're inquiring about. The R50 Pathfinder is a unibody vehicle and doesn't have a separate frame.
Posted: Tue Oct 11, 2016 3:28 pm
by Stonewolf
Homer J wrote:Since you're posting this in the R50 sub, I have to assume that is what you're inquiring about. The R50 Pathfinder is a unibody vehicle and doesn't have a separate frame.
Didn't know this thread was for th R50 Pathfinder i don't know if mine is an R50 , how to you check if it is an R50 or Not
it was the only thread i saw with 1996-2005
All i know is i have a 1996 Nissan Pathfinder SE with a 3.3L V6 and want to know if i can yank the dosy off and put a truck body on the Frame
Posted: Wed Oct 12, 2016 12:08 pm
by smj999smj
1996 through 2004 Pathfinders are R50 models. As mentioned, they don't have a frame, like the 1997-1995 (WD21) and 2005-2012 (R51) models do. R50's have a unibody chassis; essentially, the floorpan and rocker panels constitute the "frame."