Page 1 of 1
Brake Line Size 97 pathfinder 4wd
Posted: Mon Dec 02, 2019 4:57 pm
by dksellschicago
I have a couple brake lines that are leaking, I am almost positive that they are the hard lines. Does anyone know what size they are? I am thinking of buying a whole spool of brake line and going to town.
Posted: Mon Dec 02, 2019 10:22 pm
by smj999smj
The brake line is 4.75MM, which is the same as 3/16-inch. The brake line nuts and fittings are most likely 10Mx1.0. I would recommend 90/10 copper/nickel brake line. It bends easily and it doesn't rust and you can buy it "by the roll."
Posted: Tue Dec 03, 2019 9:57 am
by dksellschicago
[quote="smj999smj"]The brake line is 4.75MM, which is the same as 3/16-inch. The brake line nuts and fittings are most likely 10Mx1.0. I would recommend 90/10 copper/nickel brake line. It bends easily and it doesn't rust and you can buy it "by the roll."[/quote]
Would this kit work?
https://www.amazon.com/Copper-Nickel-Tu ... ve&sr=1-30
Also, Is it safe to assume it is just a standard double flare on the lines? I mean, I guess I will find out when I remove them, but all I have is an SAE Flare kit
Posted: Tue Dec 03, 2019 9:33 pm
by smj999smj
Yes, that should work, and double-flared fittings.