Postby smj999smj » Wed Sep 24, 2014 10:32 am
IIRC, it's just a round dowel with splines on on the end to keep it in place. You could try a junk yard for a hinge, or possibly, if they only have older Pathfinders, knock the pin out of a hinge and see if it'll work. If you can find a piece of steel rod the same size, you could cut it to size and install it, maybe putting a little epoxy on the end of the rod before you finish tapping it through. I would imagine it's probably 4 or 6mm. The main thing is that it has to be a snug fit or the window could rattle, not seal properly, or, most likely, the new pin will just fall out. A new hinge online runs about $36.