Rocker panel coatings

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

Gray
Posts: 750
Joined: Sun Aug 26, 2007 12:39 pm
Location: xxx

Rocker panel coatings

Postby Gray » Sat Sep 27, 2008 5:49 pm

Do any have experience with different types of rocker panel coatings. I've been looking at 3M products but was wondering if there might be something more effective. Thanks.

http://solutions.3m.com/wps/portal/3M/e ... TWTJQPBBgl

.


Npath
Posts: 356
Joined: Wed May 21, 2008 10:20 pm
Location: Vancouver, Canada

Re: Rocker panel coatings

Postby Npath » Sat Sep 27, 2008 8:43 pm

Greybrick wrote:Do any have experience with different types of rocker panel coatings. I've been looking at 3M products but was wondering if there might be something more effective. Thanks.

http://solutions.3m.com/wps/portal/3M/e ... TWTJQPBBgl

.
I've used Hammerite on 1/4" plates that was directly bolted to the side of my 1982 CJ7. Never chipped or flaked off and it gave the plate a smooth pourous finish.

It came in a aerosol can and you'll probably need 2 cans to spray both sides.

With the 06 Pathfinder with step boards, that really protects the rocker panels.

I've also read some messages on other Nissan forums that they've used 3M clear tape on their plastic bumpers? It's fairly thick and think it does a pretty good job, but applying it to rocker panels in one length will get tricky.

cheiane
Posts: 20
Joined: Wed Jul 13, 2011 7:43 pm
Location: carson, california, usa

Re: Rocker panel coatings

Postby cheiane » Thu Oct 27, 2011 12:11 am

Gray wrote:Do any have experience with different types of nissan truck rocker panels coatings. I've been looking at 3M products but was wondering if there might be something more effective. Thanks.

http://solutions.3m.com/wps/portal/3M/e ... TWTJQPBBgl

.
having the same thought before.. try searching on stylintrucks. i think they have 3m in there. glad that my mechanic help me on this.


Return to “2005-2012 Pathfinder (R51)”

cron