2006 Nissan pathfinder Cranks But doesn't start when hot

The Gas and Diesel Engines - VQ40De, VK56DE, YD25DDTi, V9X, Transmission, Transfer Case, Oil, Differentials, Axles, Exhaust...

Moderator: volvite

veroonc
Posts: 8
Joined: Mon Feb 17, 2020 12:30 pm

2006 Nissan pathfinder Cranks But doesn't start when hot

Postby veroonc » Thu Apr 09, 2020 4:58 pm

I drive the pathfinder for 30 mins, turn off and try to restart doesn't start.
Cold starts- Perfect
Parts Replaced
-Spark plugs
-Coil packs
-Injectors
-Fuel Dampers
-Fuel Pump
-Both Camshafts position Sensor
-Crankshaft Position Sensor
-Ipdm Unit With New Relays & Fuses
The Pathfinder is showing no codes, only tpms light.
It seems as if there is no spark when hot.
Any Advice is helpful


User avatar
smj999smj
Site Admin
Posts: 6060
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Fri Apr 10, 2020 10:10 am

Did you use OEM crank and cam pos sensors?

veroonc
Posts: 8
Joined: Mon Feb 17, 2020 12:30 pm

Postby veroonc » Sun Apr 12, 2020 10:35 pm

OEM Crankshaft sensor and Cam Shaft

User avatar
smj999smj
Site Admin
Posts: 6060
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Mon Apr 13, 2020 2:08 am

Pull out a coil pack, install a spark plug in it and ground it while someone tries to start the vehicle to confirm no spark. If you have spark, check fuel pressure. If you don't have spark, you'll have to refer to the factory service manual's engine control section for the diagnostic steps for no start/no spark conditions. NICO Club has free Nissan FSM's at their site.


Return to “R51 Engine, Driveline and Powertrain”