Titan/Armada brake swap to PF?

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Titan/Armada brake swap to PF?

Postby pearl62 » Thu Sep 24, 2009 8:49 am

Does anyone know if the Armada 12.6" (320mm) or 13.8" (350mm) rotor can fit the 05+ Pathfinder? I'm mostly interested if the Titans use calipers brackets to hold the caliper a little further out. They aren't shown in any diagrams I've seen.

The part numbers for the master cylinder, front spindle and calipers are the same, so I am thinking I would only need to change the backing plate and rotor to get some bigger brakes. Is there a caliper spacer there too?


SHAWNATGERBROCK
Posts: 209
Joined: Fri Sep 01, 2006 4:11 pm
Location: Portland OR

Postby SHAWNATGERBROCK » Thu Sep 24, 2009 12:50 pm

6X139 vs 6X114.3 bolt pattern so the rotors will not just slide on ... you would have to redrill them to fit ..

pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Postby pearl62 » Thu Sep 24, 2009 2:01 pm

Hmm, I didn't notice that. Thanks for the information...

User avatar
Tech
Posts: 395
Joined: Mon Mar 16, 2009 2:46 pm

Postby Tech » Fri Sep 25, 2009 6:55 pm

i have a hard time believing the spindles are the same - the toque member bolts on a titan/armada are huge and get torqued to 160ft/lbs. I don't think the front axles are the same either....i could be wrong, but i'd double check...

pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Postby pearl62 » Sun Sep 27, 2009 3:11 pm

They show the same part numbers for the spindles on coutresynissans parts site.


Return to “2005-2012 Pathfinder (R51)”

cron