bolt pattern conversion to 6 x 139

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

ByPath
Posts: 52
Joined: Wed Feb 03, 2010 11:52 pm

bolt pattern conversion to 6 x 139

Postby ByPath » Thu Feb 04, 2010 9:19 am

our 6 x114.3 bolt pattern is very odd and limiting.....anyone try a hub bearing conversion from the older r50 pathfinders or even recent model frontiers ?

thanks


G35TR
Posts: 241
Joined: Mon Feb 12, 2007 11:39 am
Location: NE Florida

Postby G35TR » Thu Feb 04, 2010 2:22 pm

I show no difference in 4WD Frontiers through 2010 models.

I am interested in this though, as the wheels i like aren't available in our size.

Image

User avatar
GOTGOO
Sponsored Member
Posts: 387
Joined: Wed Dec 24, 2008 9:15 pm
Location: St.Louis, MO

Postby GOTGOO » Thu Feb 04, 2010 3:26 pm

The pathy, frontier and xterras are the same bolt pattern. The armada and titian have the bigger bolt pattern your looking for. Same as GM truck 6 lug and even the same hub bore from what i've read.

ByPath
Posts: 52
Joined: Wed Feb 03, 2010 11:52 pm

Postby ByPath » Thu Feb 04, 2010 3:56 pm

do u think the armada hub bearings will fit the pathfinder r51?

the older r50 used 6x139
GOTGOO wrote:The pathy, frontier and xterras are the same bolt pattern. The armada and titian have the bigger bolt pattern your looking for. Same as GM truck 6 lug and even the same hub bore from what i've read.

User avatar
Tech
Posts: 395
Joined: Mon Mar 16, 2009 2:46 pm

Postby Tech » Thu Feb 04, 2010 7:54 pm

the older hubs are totally different. They have the 4wd hub that bolts on to a carrier that the bearing races sit in and the rotor and wheel bolt to. R51's are knock off rotors on a "bare" hub.

yarilo
Posts: 65
Joined: Tue Nov 27, 2007 10:34 am
Location: Moscow/Russia
Contact:

Postby yarilo » Thu Feb 04, 2010 10:16 pm


ByPath
Posts: 52
Joined: Wed Feb 03, 2010 11:52 pm

Postby ByPath » Thu Feb 04, 2010 10:28 pm

that will work but it adds 30mm of negative offset in addition to the offset you will have with the wheels that is put on the car.

I need a hub conversion, hopefully there is a direct swap that may work.
yarilo wrote:Are you looking for this?
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=

yarilo
Posts: 65
Joined: Tue Nov 27, 2007 10:34 am
Location: Moscow/Russia
Contact:

Postby yarilo » Fri Feb 05, 2010 1:33 am

ByPath wrote:that will work but it adds 30mm of negative offset in addition to the offset you will have with the wheels that is put on the car.

I need a hub conversion, hopefully there is a direct swap that may work.
yarilo wrote:Are you looking for this?
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=
I don't want to say - this is impossible but better try to apply your efforts on something else (in your Pathy, I mean) because I'm looking in a few confs constantly for a few years and didn't heard anything about this, and of course I'm not talking about possible problems you will face in case of such replacement, really.

Negative offset - that's funny, people on Frontier are crying to to have wider base, so +2'' fender flares, 15'' rims and 33'' tires and you will be a king of the road :D

Max


Return to “2005-2012 Pathfinder (R51)”

cron