https://www.4x4parts.com/i-22756999-rea ... hings.html
Thanks!
Will this fix my rear camber issue?
Moderator: volvite
Will this fix my rear camber issue?
I installed Moog Armada Springs and although I like the lift ~3" or more, I cant get the camber adjusted correctly (which I expected). Will this allow for proper adjustment?
https://www.4x4parts.com/i-22756999-rea ... hings.html
Thanks!
https://www.4x4parts.com/i-22756999-rea ... hings.html
Thanks!
Re: Will this fix my rear camber issue?
No one has anything on this? 
-
silverarrow27
- Posts: 463
- Joined: Sat May 02, 2020 1:40 am
- Location: Banning, CA
Re: Will this fix my rear camber issue?
From what I've seen on here. It's like a 50/50 with the bushings. Might be better off with the gussets that someone else had success with recently. Cheaper and most likely last twice or three times longer than the bushing solution.
It worked for me, but it was expensive, and even the machine shop I took it to had a hard time with it. Gussets are the way to go.
My 2011's rear suspension is OME medium springs with OME Nitrocharger shocks.
It worked for me, but it was expensive, and even the machine shop I took it to had a hard time with it. Gussets are the way to go.
My 2011's rear suspension is OME medium springs with OME Nitrocharger shocks.
Last edited by silverarrow27 on Wed Jan 26, 2022 2:01 pm, edited 2 times in total.
Re: Will this fix my rear camber issue?
I did a 1 1/2 inch PRG spacer lift all around, plus the Moog heavy duty stock replacement springs in the rear. And I spoke with 4x4 parts to confirm how to install, and checked to ensure that the shop had installed them correctly.
It didn't work for me. Still couldn't get the rear alignment in spec.
It didn't work for me. Still couldn't get the rear alignment in spec.
Find Your Forum!