320mm rotors from other Nissans???
Moderator: volvite
-
Zen_master
- Posts: 308
- Joined: Fri Apr 12, 2013 7:42 pm
320mm rotors from other Nissans???
The V8 Pathfinder runs 320mm rotors in the front. I am looking for crossed drilled and slotted rotors. With the V8 Pathy being such a limited production run there isn't much marketed specifically to it. Does anyone know if other Nissan models (Z Car, Q56, etc) might have the same bolt pattern in 320mm rotor size? Thanks!
-
TooMuchControl
- Posts: 382
- Joined: Tue Apr 28, 2020 4:41 pm
Re: 320mm rotors from other Nissans???
https://www.wheel-size.com/pcd/6x114.3/
Looks like the Mercedes has the exact same size center bore as well..now I see it's a Nissan based truck.
Oh well.
I'd watch out for that center bore size, or it's liable to create problems if it doesn't match.
Looks like the Mercedes has the exact same size center bore as well..now I see it's a Nissan based truck.
Oh well.
I'd watch out for that center bore size, or it's liable to create problems if it doesn't match.
-
Zen_master
- Posts: 308
- Joined: Fri Apr 12, 2013 7:42 pm
Re: 320mm rotors from other Nissans???
Thanks. Went ahead and sprung for the Amazon set. Will report back how it goes.
https://www.amazon.com/Premium-Rotors-C ... 97e41410bb
The V8 R51 has been a great truck but one of the main drawbacks is limited aftermarket support. Can't even find a decent bolt-on CAI for the rig, so no surprise performance brakes are not plentiful.
https://www.amazon.com/Premium-Rotors-C ... 97e41410bb
The V8 R51 has been a great truck but one of the main drawbacks is limited aftermarket support. Can't even find a decent bolt-on CAI for the rig, so no surprise performance brakes are not plentiful.
-
TooMuchControl
- Posts: 382
- Joined: Tue Apr 28, 2020 4:41 pm
Re: 320mm rotors from other Nissans???
I wonder about the quality of rotors.
As you state, limited options when you look for those slotted/dimpled.
It's a great price for that set!
I've actually ordered the EBC combo (last week in fact) as recommended by others, and am waiting for Amazon to fill in the order (temp out of stock)
EBC Brakes S14KF1152.
As you state, limited options when you look for those slotted/dimpled.
It's a great price for that set!
I've actually ordered the EBC combo (last week in fact) as recommended by others, and am waiting for Amazon to fill in the order (temp out of stock)
EBC Brakes S14KF1152.
-
Zen_master
- Posts: 308
- Joined: Fri Apr 12, 2013 7:42 pm
Re: 320mm rotors from other Nissans???
No issues so far. To be honest, can't tell much difference compared to factory.
-
silverarrow27
- Posts: 462
- Joined: Sat May 02, 2020 1:40 am
- Location: Banning, CA
Re: 320mm rotors from other Nissans???
The next step up would be the Z1 big brake kit.
Re: 320mm rotors from other Nissans???
I went with EBC GD rotors for a 2008 V8 Pathfinder on my 06 Nissan V6 Pathfinder. They are high-carbon cast iron, slotted and dimpled. They aren't cheap, but they are a nice set of rotors.
Find Your Forum!