. After months of legally purchasing all components at the lowest prices possible all 6 packages have been delivered. Pictures below are of components to be installed this weekend.
2005 Canadian Pathfinder... Project: Everything must go
Moderator: volvite
2005 Canadian Pathfinder... Project: Everything must go
Hey guys, I will use this thread to keep you updated on progress of my soon to BOSE stripped 2005 Pathfinder. The goal is to replace every audio component that is stock From Deck to speakers the only thing stock will eb Door speaker wiring,. Additionally I will add a rear view camera, Sirius satellite radio, and then if i have any money left an eBay bought XBOX which may already be modded .
After months of legally purchasing all components at the lowest prices possible all 6 packages have been delivered. Pictures below are of components to be installed this weekend.
. After months of legally purchasing all components at the lowest prices possible all 6 packages have been delivered. Pictures below are of components to be installed this weekend.
That looks like a lot of fun. Well at least after you are finished installing it all. I'm surprised you aren't changing the wiring after going thru the expense of the equipment. I know it would add to the time, but may make it all sound that much better. Good luck on the install, one thing you should do is get some extra plastic panel plugs. I usually break at least 1 when removing panels
Update: This weekend has completed exhausted me! and I have not even completed the install. So far I have the deck and all the RCA's replaced, front speakers and tweeters replaced( new wiring for the tweeters stock wiring for 6.5 )front doors sound deadened, rear view camera added, dvd /nav bypass, rear view camera by pass. both amps installed although wiring is not completed hidden yet.
What's left? rear doors and mounting the subs in the box and into the car.
Problems so far? After temporally putting my car back together ( so I can drive to work) the TCS and SLIP and air bag lights stayed on. After a few short trips the TCS and SLIP light turned off but both air bag lights remain on. I will go over my connections but I am sure all harness are reattached. Anyone know if a computer reset is needed to clear the code? or is there truly a damaged wire or unplug harness?
(I will try and get my additional pics up as soon as possible)
What's left? rear doors and mounting the subs in the box and into the car.
Problems so far? After temporally putting my car back together ( so I can drive to work) the TCS and SLIP and air bag lights stayed on. After a few short trips the TCS and SLIP light turned off but both air bag lights remain on. I will go over my connections but I am sure all harness are reattached. Anyone know if a computer reset is needed to clear the code? or is there truly a damaged wire or unplug harness?
(I will try and get my additional pics up as soon as possible)
the TCS/Slip issue is normal. Every time you disconnect the battery you will get that and 5 mins of normal driving will clear it as you found out.
I think I remember my airbag light staying on after messing around also but I'm not 100% on how I fixed it.
I found this on a Titan board. I'm pretty sure I used this method or another similar one:
1)turn ignition switch from off to on
2)within 1 second after the aribag light starts to flash---immeditely turn the ignition off
3)after ignition is off, wait for more than 5 seconds
4)then repeat steps 1 through 3---do all steps 3 times
5)turn the ignition on, and the airbag sensor should go off and not flash anymore
I think I remember my airbag light staying on after messing around also but I'm not 100% on how I fixed it.
I found this on a Titan board. I'm pretty sure I used this method or another similar one:
1)turn ignition switch from off to on
2)within 1 second after the aribag light starts to flash---immeditely turn the ignition off
3)after ignition is off, wait for more than 5 seconds
4)then repeat steps 1 through 3---do all steps 3 times
5)turn the ignition on, and the airbag sensor should go off and not flash anymore
I just posted the directions the other day in the 2005+ pathfinder section. It's under resetting air bag light. Please try and do a little searching. Oh and Mr. Ceddy I saw your post on nissanforums too. That is where I originally got the directions. I'm not trying to be a harda55, but that is what the search button is for, so we don't get repeat posts.
Thanks for the tip Boogyman, please keep in mind the purpose of this thread is to enlighten the community on my audio install , and not to educate others on how to reset an airbag error code. I will upload my pictures shortly... sorry for the delay.boogyman wrote:I just posted the directions the other day in the 2005+ pathfinder section. It's under resetting air bag light. Please try and do a little searching. Oh and Mr. Ceddy I saw your post on nissanforums too. That is where I originally got the directions. I'm not trying to be a harda55, but that is what the search button is for, so we don't get repeat posts.
.. here are some pictures I have on my work pc. 
Find Your Forum!