Today I noticed my Path does not report via the horn when I lock the doors. I also noticed that I don't see the lights flash. I know for sure the lights flashed as of yesterday morning when locking via the fob but I don't remember if I heard the horn or not. Anyone else have this issue?
Now I do know that you can turn the horn honk feature on and off via holding both buttons down for a few seconds to change modes. I did change the mode several times back and forth and this made no difference. The lights would either blink once and the horn would honk quickly when setting the horn mode, or the lights would blink 3 or 4 times with no honk in silent mode. But after that there would be no further blinking or honking regardless of mode. I went through the manual and it shows this special 5th option I am not getting in the display screen that is supposed to be there for those with Navigation like me. Apparently there are some settings there. Now that I think about it I am going to go back and re-read that section again.
Nothing has changed except on Tuesday I pulled a Darwin and had my auto-headlights on but never got out of the path. So for 2 hours while I slept the lights were on and drained the battery out. I will probably try pulling the + cable to reset everything today anyways and see if that makes a difference but figured I would post and ask if someone else has had this problem.