12 volt on tow not reading voltage....

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

Post Reply
jasunderland
Posts: 101
Joined: Mon Jul 26, 2010 6:59 am
Location: Wolcottville, IN

12 volt on tow not reading voltage....

Postby jasunderland » Thu May 05, 2011 6:01 pm

I have a 7 pin harness going to my popup but I am am not getting anything. I unplugged the harness and checked the TV and i did not read any voltage at the 7 pin plug...

I looked at the fuses and none were blown, however, it almost looked like there were some missing:

In the first picture, it looks like in the bottom left next to the 10AMP fuse... there is a spot for 40/30/40
Image

on the next pic, it is at the bottom, 4th from the left "F/L 30A Trailer Tow"

Image

Do I need a fuse in there to get the 12v to work from the TV to the popup?

Thanks

-jeff

Top
jasunderland
Posts: 101
Joined: Mon Jul 26, 2010 6:59 am
Location: Wolcottville, IN

Postby jasunderland » Fri May 06, 2011 5:17 pm

Anyone know which fuse if for the 12volt power supply?
Top
07SECrownie
Posts: 19
Joined: Tue May 03, 2011 8:49 am
Location: Cincinnati, Ohio

Postby 07SECrownie » Fri May 06, 2011 7:49 pm

You will need a fuse in there to get the 12 volts out of the fuse block.
Top
Post Reply

Return to “2005-2012 Pathfinder (R51)”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2025 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy