Moderator: volvite
I’ve done this recently tried to do it on my own but I’ve discovered that my brake master is broken or what so ever damage it is. So after installing the new pads, I purchased a to fix things up. I would just like to remind you to clean things first so you won’t grease up the discs.wizeguy wrote:Just did mine.. Very easy to do.
caliper bolts are 14mm(?)... Before pushing pistons back in, I like to clean the calipers and pistons with brake clean (make sure the cap is off the master cylinder)
Caliper bracket bolts are 17(?)mm.. I use a breaker bar or impact gun on those.
Make sure to use new pad/caliper hardware kit. Or if your going to reuse, clean them well.
Lube the caliper bolts and pads on the shims...
Good luck!