Postby Vividcard » Mon Aug 20, 2012 8:13 am
After dropping mine in I ran single line to test, I will ride like this for a month or so they try the alternative for testings sake, and I will report the results here. My preliminary theory is if your running the lifts for support with something on the back (IE boat, camper, ect..) you should probably run individual. So as to avoid sway pressure change. As you take the turn, your PSI would drop on one side and increase on the other.
However if you are planning to just use as a driving support 95% of the time (like me) then the pressure change on hard turns is going to be so minimal that you likely won't be able to tell the difference. But I shall back all of this up with time. Back to testing.
P.S. If you are still on the fence about getting a set of airlifts for your pathy, DO IT. Best mod vs. cost. It tightened it up so much. I've tested it on the backroads here in oregon. Including a drive up to bagby hotsprings. which resembles this: ~~~~~~~. and there was practically no sway @ 20 PSI with 7 people in the truck, no trailer.