here i removed the passenger seat, marked and measured out a piece of cardboard to get a rough estimate of how i need to cut the 1/4" sheet of mdf i got to mount the amp, crossover and distribution block (keeping wire routes and floor vents in mind):

traced the cardboard cutout to my sheet of 1/4" mdf:

cut the mdf & it fits perfect!:

leveled the mdf out:

mounted everything to the mdf:

test fit:

wired up:



and the subwoofers (the amp for this is under the driver seat, which i have not created a mounting board or anything for yet because i might get a different amp) :
