Replacing coolant hose clamps

Gray · Postby **Gray** » Wed Nov 05, 2008 12:37 am

Just wondering how many have started replacing all of those radiator and coolant hose dummy clips on the VQ40 engine with something more dependable.

Another project...

.

Postby **Captain** » Wed Nov 05, 2008 6:45 am

We use this type of clamp all the time at work for coolant and highpressure boost hoses for the turbos. I would sudgest jetting one with the spring between the nut and clamp. this way the clamp all ways put pressure on the clamp.

markspath · Postby **markspath** » Wed Nov 05, 2008 1:11 pm

Greybrick wrote:Just wondering how many have started replacing all of those radiator and coolant hose dummy clips on the VQ40 engine with something more dependable.

Another project... .

I never had or saw a hose clamp fail during operation in 40+ years. Sure, I've blown hoses and have seen them blow, and I've had clamps bust when trying to reuse them after replacing/repairing a hose. I've used cable ties in a pinch when I had to replace a hose or jam a screwdriver through a faulty thermostat, and they worked well enough that I could drive through the weekend until I could get to an autoparts store.

I wouldn't waste the time or money on replacing the standard clamps. I keep a bunch of spares in the toolkit and, like I said, have never needed to use one except when changing a hose out. But when you do change a hose, definitely change both clamps. If it makes you feel safer to use the above clamps, far be it from my place to tell you no. I just don't think its a problem that needs to be fixed.

Replacing coolant hose clamps

Replacing coolant hose clamps

Re: Replacing coolant hose clamps

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums