The Nissan Path

AS_The_Crow_Flys

https://www.alldogsoffroad.com/alldogs- ... pathfinder

topic21335.html

AS_The_Crow_Flys

The entire front suspension needs replaced due to serious rust and squeaking issues. I'll be going with a modest 2" 5100 lift. Since I need to replace the upper and lower control arms anyway im wondering if it's worth getting upgraded/ performance UCAs and LCAs. The price difference is substan...

AS_The_Crow_Flys

VStar650CL wrote: ↑
Fri Sep 09, 2022 1:20 pm

Wahooo wrote: ↑
Fri Sep 09, 2022 11:01 am
Used to call that, shaking hands with death
In some countries they cut hands off for stealing. Here only our vehicles do it.

It was a plastic fan so… probably not that dangerous.

AS_The_Crow_Flys

Hi All I would love to find a donor pathy with a good interior for a swap (i have a S 4WD base base base model). Seats are my first priority. However, it would be nice to be able to swap over whatever is nicer. Does anyone know what sort of compatibility there is with the interiors? Are all years in...

AS_The_Crow_Flys

My redneck test for this was to grab a small towel and see if i could stop the fan from spinning when warm... I supposed turning the engine off after warming it up is a little safer.

AS_The_Crow_Flys

Dang, mines just a preteen compared to yours. 2007 with 121k.

AS_The_Crow_Flys

Original bolt is definitely recommended. It is likely a high strength bolt that you would have a hard time getting a replacement for that is appropriate. No affiliation but i have had good luck here: https://www.courtesyparts.com/ Or order online and pickup at local dealership. BTW, call in or walk ...

AS_The_Crow_Flys

BTW, there are some squeaks (i think from the suspension), but I still love this tire wheel and suspension setup. MPGs went from 15.5 to 13.8/13.9. However, the previous tires traveled about 10% less distance then the current ones. So based on my calculations its a wash to maybe .1 or .2 percent les...

AS_The_Crow_Flys

I got stuck in the dewalt ecosystem so i have been lusting after this:
https://www.dewalt.com/product/dcf891b/ ... tid=577216

AS_The_Crow_Flys

I would check you hinges on the rear window. I had to replace mine. they held on for a while, and then one day i went to the car wash and you can guess what happed. Hinges fixed the issue.

AS_The_Crow_Flys

Replacing a vehicle right now is pretty painful. You didn't mention the mileage or anything about the condition of the engine or transmission. But If your doing the work yourself i would lean towards fixing.

AS_The_Crow_Flys

palmerwmd wrote: ↑
Sat Aug 27, 2022 5:32 am

shocker wrote: ↑
Thu Aug 25, 2022 4:57 am
https://www.instagram.com/p/ChqD2BmvmV2/

https://www.instagram.com/p/ChcqmcOr_2t/
Wow that thing is a beast!!!
Have you published your build list here yet?

What he said!

AS_The_Crow_Flys

I used to use PB Blaster on my old BMW Bavaria (72, 73, or 74 I forget at this point). It was okay, better than any other option I had at the time. I have some seafoam deep creep to try. According to project farm its supposed to be pretty good. But the truth is I just don't have much rust to truly p...

AS_The_Crow_Flys

This is one of those things I want but don't need unfortunately.

Did you ever find a buyer for these? Someone should bite.

AS_The_Crow_Flys

The shift cable is bracketed to the tranny, so bad engine or trans mounts won't usually affect it like they do on some other vehicles. However, you could still have a stretched cable or some wear in the shifter that caused it to get out of adjustment. The first thing to do is check that. See AT-216...

Search found 127 matches

Re: 2" lift UCA question 2008 V8

Re: 2" lift UCA question 2008 V8

Re: Mechanical fan clutch always roaring

Interior Swap (at least seats)

Re: Mechanical fan clutch always roaring

Re: Any high mileage R51's out there with little problems?

Re: Lower front strut bolt

Re: Thinga-Ma-Jigger Update

Re: Got rust?

Re: A different type of tailgate window leak

Re: Severely rusted trailer hitch and MANY other potential problems, 2008 V8

Re: Show it off!! Recent pics of your Pfinder, let's see 'em!

Re: Got rust?

Re: SPC Upper control arms

Re: Transmission Clunk

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums