Page 1 of 1
headlights work but high beams dont, help?!
Posted: Tue Oct 06, 2009 12:34 pm
by 90pathy
I have a 91 pathy and i cant get why the regular lights work but not the high beams. The fuses are all good and the lights are brand new. Anyone got any ideas at what could be worng?
check the switch
Posted: Thu Nov 19, 2009 6:05 pm
by Scaramoche
If the lights are working, but the hi's dont, you will probably want to check/replace the highbeam switch. If anything you can pull it, and test with an ohm meter.(may need a diagram to do that though.)
Posted: Tue Nov 24, 2009 4:32 pm
by Xunal
I have a similar problem:
Low beams work....fog lights don't work (they did one time....), and sometimes one high beam will work, othertimes none will.
So confuzzled.
Posted: Mon Jan 25, 2010 7:40 am
by JUS 1 MO
I have the same problem except only the drivers side low beam works, no high beams on either or fog lights. I tried changing the bulb, that didn't work. It's kind of hard to drive after dark.
Posted: Thu Feb 04, 2010 7:08 am
by JUS 1 MO
Well, I fixed the problem with my headlights. I put a new switch in and it corrected everything...