I had LED's for a while...went back to normal halogen. The disperal pattern was wrong. I've messed with aftermarket housings in other vehicles and don't have much interest in a not-quite-Nissan fit in the front of my truck.
Best thing I've done is take my 3" orbital polisher with plastic polish to the headlamps and keep them haze and scratch free. I also replaced my fog light lenses which are glass, but were getting a little dirty on the inside. (Oh and I sealed the replacements with butyl rubber for headlight housings, to try to make them last a bit longer.)
This keeps plenty of light coming out the front.
If anyone's interested, every single other light in my truck except the license plate illuminator is LED. Every two years or so, or whenever one burns out, I get slightly brighter interior lights based on what's new on Amazon. Getting both turn and brake lights in behind the rear light housing is a PITA and I had to get a couple different sets to make it fit, but now that they're in, no one nearby is going to miss that my truck intends to make a turn