license plate bulbs

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

User avatar
admiral
Posts: 45
Joined: Sat Apr 28, 2007 1:55 am
Location: Copperas Cove, TX

license plate bulbs

Postby admiral » Sat Jul 17, 2010 2:39 pm

Have any of you gentlemen or ladies had to replace the bulbs from your license plate? I had to this morning and those two phillip screws are hard to get to. So I took a 10mm socket and a 7mm socket and gently pulled the inside cover from the rear gate. I found this easier that wrestling with two philip screws. It helps if you have nimble hands and don't wear a watch if your going from inside the vehicle.


User avatar
mar1
Sponsored Member
Posts: 1041
Joined: Fri Jun 19, 2009 9:08 am
Location: Dubai
Contact:

Postby mar1 » Sat Jul 17, 2010 3:14 pm

are u by any chance a gynecologist? :lol:


good info bro. will use it later on

User avatar
admiral
Posts: 45
Joined: Sat Apr 28, 2007 1:55 am
Location: Copperas Cove, TX

Postby admiral » Sat Jul 17, 2010 3:15 pm

lol, no. I just didn't feel like wrestling with the phillips screws or looking for a special screwdriver.

User avatar
Kami
Posts: 243
Joined: Wed May 12, 2010 8:59 pm
Location: Toroto, ON

Postby Kami » Sat Jul 17, 2010 10:51 pm


User avatar
admiral
Posts: 45
Joined: Sat Apr 28, 2007 1:55 am
Location: Copperas Cove, TX

Postby admiral » Sun Jul 18, 2010 6:57 am

I did the same thing except I did not remove the light bulb covers. I just pulled the light bulb plug from the back(inside). Put the new bulbs in and sealed everything up. It took about 15 minutes.

tariqhu9
Posts: 24
Joined: Tue Feb 16, 2010 10:34 pm
Location: Decatur, GA

my bulbs have been out for a while.

Postby tariqhu9 » Sun Apr 21, 2013 1:56 pm

I changed them today but the new ones didn't work either.

Any ideas on what need to be fixed?


Return to “2005-2012 Pathfinder (R51)”

cron